5 Common Basement Waterproofing Mistakes and How to Avoid Them

Every house must include a basement, which is often used for storage or even as a living space.

Every house must include a basement, which is often used for storage or even as a living space. Sadly, basements are also vulnerable to water damage, which may cause major issues including mold development, structural damage, and a decline in home value. In order to minimize water damage, waterproofing your basement is a crucial step, but there are certain typical blunders that should be avoided. Here are five frequent basement waterproofing blunders to watch out for.

Mistake 1: Ignoring the Root Cause of the Problem

When waterproofing their basement, homeowners often neglect to address the underlying source of the issue. Numerous things, such as inadequate drainage, foundation fractures, and broken plumbing, may cause water to enter your basement. Finding the source of the water damage is essential before you can waterproof your basement. Ignoring the fundamental issue can only provide short-term fixes, and you risk having to deal with water damage once again.

Solution: Inspect Your Basement for Signs of Water Damage

Check your basement for evidence of water damage before you begin waterproofing it. Search for water stains on the walls or floors, foundation cracks, or musty odors. Hire a specialist to assist you in determining the main source of the issue if you observe any of these symptoms.

Mistake 2: Improper use of waterproofing products

Applying waterproofing solutions incorrectly is another typical error people make while waterproofing their basements. Sealants and coatings for waterproofing must be applied appropriately to be effective. They could not seal well if you apply them improperly, enabling water to leak into your basement.

Solution: Follow the Manufacturer’s Instructions

It is crucial to carefully follow the manufacturer’s directions while applying waterproofing solutions. Before going on to the next stage, be sure the product is applied to the proper thickness and has had time to fully dry.

Mistake 3: Not properly caulking holes and cracks

Water may leak into your house via cracks and gaps in the basement’s walls and flooring. Unfortunately, while waterproofing their basements, many homeowners neglect to adequately plug these openings.

Solution: Use the Right Materials to Seal Cracks and Holes

You must use the appropriate materials to effectively seal any holes and cracks in your basement’s walls and flooring. Hydraulic cement is a great choice for closing bigger holes, while injections of epoxy and polyurethane are two efficient procedures for sealing cracks.

Mistake 4: Ignoring Drainage Problems

Your basement may get wet due to poor drainage. If your gutters and downspouts are malfunctioning, water may be collecting around the home’s foundation and causing water damage in the basement.

Solution: Install Proper Drainage Systems

You must build suitable drainage systems if you want to keep your basement dry. This can include adding a French drain, a sump pump, or gutters and downspouts to move water away from the foundation of your house.

Mistake 5: DIY-ing a Complicated Waterproofing Job

Although DIY projects may be enjoyable and gratifying, unskilled homeowners shouldn’t attempt to waterproof their basement. The process of waterproofing a basement may be difficult and time-consuming, and if done poorly, it may result in more water damage and expensive repairs.

Solution: Hire a Professional Waterproofing Contractor

It is advisable to engage a qualified basement waterproofing contractor to prevent making expensive errors and guarantee that your basement is waterproofed correctly. A qualified contractor has the expertise and understanding required to locate the source of the issue and create a personalized waterproofing strategy for your house.