NOTE: Updated 8/16/09 with information more recent than was available during the meeting

Notes & Agenda¶

Lights¶

• Brian installed the lights partially and is working on finishing installation
• We need more of the longer light bulbs
  • Verify this with Brian and check which fixtures need the bulbs

Tools Needed¶

• Cone Wrenches
  • 17mm
  • Need to asses what other sizes are missing
• WD-40
• 9mm Combo Wrenches
• Yellow handled pin spanners
• Vice Repair
  • Got extractor and drill bits; working on removing the sheared bolt and progress is slow
  • A new set of jaw pads is approximately $70 from McMaster
  • Current status: still working on removing the sheared bolt shank
• Compressor
  • Replaced the broken V-belt pulley and installed with proper key stock (Key stock appears to have been missing previously)
  • Current status: working just fine

Parts organization¶

• Working on parts storage solution
  • We should ask CJ to keep an eye out for some suitable drawers
  • Should call up a contact who used to run an automobile repair shop
    • Will is going to follow up on this
  • Another possibility is to contact the bins company and ask for a discount or donation
• Ben is interested in helping with making the labels for the new storage.