To remove the negative space from your design is called weeding vinyl, but sometimes it can be a quite complicated, and difficult process to finish. If you are planning to attempt weeding intricate vinyl design, then here we are to help you with some of the tips and tricks. You can use them to have professional and neat results.

Tips to Weed Intricate Vinyl Design

TIP#1: Sometimes, it may be too difficult for you to look at the fine lines closely. In this case, use a light pad; it can help you in taking a closer look at your design and in weeding the vinyl. The design will be safe, and light will shine through the design. You can weed through design easily, and there will be no damage to your project. The light pad is something you should have when working on such a crucial project.

TIP#2: For some of the beginners, this may be difficult to understand why it’s essential to remove excessive vinyl from the design. Well, if you won’t do this, then the sticky side will be exposed and ruin the whole hard work. It’s essential to work slowly while weeding off vinyl because speed can also damage the look.

TIP#3: Always start weeding from the corner of your design as it exerts less pressure on the whole material. Never start from the middle as the possibility of damaging the design is higher. Use a weeding tool, kit, or any of the finest instruments.

❊❊❊ Picked For You: Reviews on Products CraftsSelection.com

TIP#4: Sharp blade is the key. If you are using a blunt blade to get cuts, then at the time of weeding, the whole design will be damaged due to half and irregular cuts. Make sure that the machine you are using must be up to the mark and has sharp blades to give you great cuts.

TIP#5: At the time of weeding, ensure that your design is not rolling away. If you are doing weeding on some rough surface, then there is no benefit of working hard. Always place the vinyl design on the cutting mat and then start working on it at a slow pace.

TIP#6: If you are working through the software on your vinyl design then you should do some settings first. Keep a square box around the design and in this way, necessary cutting will be done instead of moving to the place that is not worth your time.

TIP#7: Magnification is another key you need to focus on. If you are the person who likes neatness and clean edges in all your projects, then keep a magnifying glass with you. With the help of fine tools, you can trim the edges of the paper later. A magnifying light can also help you separate lines.

✪✪✪ Related Article: ➡️➡️ Good Product Reviews and Comparison

Conclusion:

When you are working on weeding intricate vinyl, then it can be a bit hectic and difficult to deal with. By adopting some of the above-mentioned tips, you will be able to get the desired results without messing with your design. This is the time to enjoy your project and get rid of stress.