Here is a walk through of how to setup a pair of disks with RAID+crypto+lvm¶

• partition the disks, one partition for the whole device, starting at sector 2048 so all blocks are aligned

• created the raid device with something like
  

  mdadm --create /dev/md3 --raid-devices=2 --level=raid1 --bitmap=/boot/md3_bitmap --bitmap-chunk=128M /dev/sdc1 /dev/sdd1

• add the md device (md2 for the above example) to /etc/mdadm/mdadm.conf so that it will start on boot. use

  mdadm -Es

  to get the UUIDs. NOTE: the labels have to match too, not just the UUIDs.

• create the crypto device with something like (riseup likes serpent-xts-plain)
  pre-buster:
  

  cryptsetup luksFormat --hash sha256 --keyfile-size 512 --cipher serpent-xts-plain64:sha512 /dev/md2

  
  on buster:
  

  cryptsetup luksFormat --hash sha256 --keyfile-size 512 --cipher serpent-xts-plain64 /dev/md2

  
  bullseye and newer:
  

  cryptsetup luksFormat --hash sha256 --keyfile-size 512 --cipher serpent-xts-plain64 --pbkdf argon2id /dev/md2

• start the crypto device with something like
  

  cryptsetup luksOpen /dev/md2 md2_crypt

• add md2_crypt to /etc/crypttab so it will be started and you’ll be prompted for the passphrase on boot (use blkid to get the UUID of the crypted device (/dev/mdX, not /dev/mapper/mdX_crypt, that’s the lvm device)

• create the LVM volume group with something like
  

  vgcreate vg_hostname1 /dev/mapper/md2_crypt

  
  or if you are adding pv to an existing vg
  

  vgextend vg_hostname1 /dev/mapper/md2_crypt

• create logical volumes with something like
  

  lvcreate --size 5G --name foo vg_hostname1

  
  

  lvcreate --extents 100%VG --name bar vg_hostname1

• create filesystems with
  

  mkfs.ext4 /dev/mapper/vg_hostname1-foo

  
  

  mkfs.ext4 /dev/mapper/vg_hostname1-bar

• add them to fstab so they will be mounted on boot

• start using the filesystems

Here’s how to setup encrypted swap¶

• create the crypto
  

  cryptsetup -d /dev/urandom --cipher serpent-xts-plain create sdb2_crypt /dev/sdb2

• create the swap
  

  mkswap -f /dev/mapper/sdb2_crypt

• turn it on
  

  swapon -a

• add it to /etc/crypttab, for example:
  

  sda2_crypt /dev/disk/by-id/scsi-SATA_WDC_WD1001FALS-_WD-WMATV0071724-part2 /dev/urandom cipher=serpent-xts-plain,size=256,swap

• add it to /etc/fstab, for example:
  

  /dev/mapper/sda2_crypt		none	swap	sw		0	0